Product Categories

Driver for 2phase hybrid stepper motor

[13]

Driver for 3phase hybrid stepper motor

[6]

Embroidery machine motor

[1]

Contact Now

Shenzhen Jingbo Mechanical & Electrical CO.,Ltd

City:shenzhen

Province/State:guangdong

Country/Region:china

Contact Person:MsJudy

View Contact Details

Contact Now

3phase stepper motor driver JB356M DC24-60V 5.0A 300 Microsteps Matching 3phase stepper motor size 57mm and 86mm

Name: 3phase stepper motor driver JB356M DC2460V 50A 300 Microsteps Matching 3phase stepper motor size 57mm and 86mm
Brand: Jingbo
Price: 1 USD

Ask Latest Price

Video Channel

Place of Origin :Guangdong, China

Brand Name :Jingbo

Model Number :JB356M

Certification :CE

Phase :3

Condition :New

Warranty :1 year

Delivery Time :in stock

Payment Terms :T/T, Paypal, Western Union

Supply Ability :500pcs per week

MOQ :1pc

Contact Now

Add to Cart

View Product Description

3phase stepper motor driver JB356M DC24-60V 5.0A 300 Microsteps Matching 3phase stepper motor size 57mm and 86mm

Features

◆High performance, low price

◆16 channels constant angle and constant torque microstep, max revolution is up to 60,000 pulse/R

◆Upmost response frequency amounts to 500Kpps

◆Once the pulse stops over 100ms, the phase current will be automatically reduced to half of pre-set current

◆Opto-isolated signal Input/Output

◆Driving current can be adjusted from 1.2A/phase to 5.0A/phase through 16 channels

◆Single power input, voltage range: DC24-60V

◆It can match 3 phase hybrid stepper motors whose current is under 5A, flange size ranges from 57mm to 86mm

◆Phase memory function (Note: Once the input stops over 3 seconds, the driver will memorize the motor phase automatically so that it can restore the phase automatically when it is repowered or MF signals change from low level to high level.)

Wiring example

Current setting

The working current of the driver is set by DIP-1 terminal, for more details please refer to the diagram below. (Note: the value is RMS)

Current (A)

1.2

1.5

2.0

2.3

2.5

3.0

3.2

3.6

4.0

4.5

5.0

OFF

Microstep setting

The microsteps of the driver are set by DIP-2 terminal with the following 16 channels. They are set separately by the first 4 of the 6 DIP-switch.(The other 2 are for function setting). Details are as below: Microsteps(pulse/R)

Microstep

400

500

600

800

1000

1200

2000

3000

4000

5000

6000

10000

12000

20000

30000

60000

OFF

ON, Double pulse: PU is clockwise pulse signal, DR is counterclockwise pulse signal

OFF, single pulse: PU is step pulse signal, DR is direction signal

Self detect switch (OFF: accept external signal, ON: the driver is running at 30R/M internal)

Terminal function

Port	Pin No	Mark	Function	Notes
RS-232	1	RX	To receive data	NC
	2	TX	To send data	NC
	3	GND	Ground	NC
	4	5V	5V Power supply	NC
Signal port	1	PU+	Step pulse signal+	It can connect +5V or +24V, but an extra resistor is needed if it connect +24V
	2	PU-	DP5=OFF, PU is pulse signal	Effects on falling edge, the motor goes one step as the pulse input change from “high” to “low”. Input resistance is 220Ω. Requirement: low voltage:0-0.5V, high voltage:4-5V, pulse width >2.5μs
	2	PU-	DP5=ON, PU is clockwise pulse signal
	3	DR+	Direction control signal+	It can connect +5V or +24V, but an extra resistor is needed if it connect +24V
	4	DR-	DP5=OFF, DR is direction control signal	Change motor’s direction of rotation. Input resistance is 220Ω. Requirement: low voltage:0-0.5V, high voltage:4-5V, pulse width >2.5μs
	4	DR-	DP5=ON, DR is counterclockwise pulse signal
	5	MF+	Motor Free signal+	It can connect +5V or +24V, but an extra resistor is needed if it connect +24V
	6	MF-	Motor Free signal-	Once effects, it will cut off the motor current, the driver stops working and sets the motor free
	7	RDY+	Opto-isolated positive of driver ready output signal	The driver is at normal state, and ready to accept control signal from controller and the signal is valid(low voltage)
	8	RDY-	Opto-isolated negative of driver ready output signal
Motor, power port	1	U	Connect to the motor
	2	V
	3	W
	4	NC	NC
	5	DC-	Power supply	Power: DC24-60V
	6	DC+	Power supply	Power: DC24-60V

! Caution

1. The input voltage can not exceed DC60V.

2. Input control signal is 5V, current-limiting resistance should be connected when it is over 5V.

3. The input pulse signal effects on falling edge

4. ALM lights and the driver stops working when the driver temperature is over 75℃. Until the temperature falls to 50℃, it will restart to work after powered-up. The heat sink is needed when overheat occurs

5. ALM lights if it is short circuit, please check motor leads and eliminate other short faults, and then repower up to restore

6. ALM lights if the motor does not connect well with the driver, please check motor leads and repower up to restore

Product Tags: